- Message Boards
- Buyer's Guide
- About Us
An accident investigation is not complete until a report is prepared and submitted to management for further review.
Use this information to initiate a process to determine why an accident happened and how to prevent it in the future. Your company may have a standard form, but if not we have included a sample report below for your convenience.
Regardless of what form is used, the accident report should cover the following four sections:
a. Where and when accident occurred
b. Who and what were involved
c. Operating personnel and other witnesses
Account of the Accident
a. Sequence of events
b. Extent of damage
c. Accident type
Discussion (Analysis of the Accident)
a. Direct causes (energy sources; hazardous materials)
b. Indirect causes (unsafe acts or conditions)
c. Basic causes (management policies; personnel or environmental factors)
Recommendations (to prevent recurrence) for immediate and long range action to remedy:
a. Basic causes
b. Indirect causes
c. Direct causes.