There are many questions being asked about rail dust, so here’s the information you need to know about removing it.
First of all, “rail dust” if removed properly does not come back.
Updated content: How to remove rail dust.
Rail dust is exactly that, when cars are transported by train (rail) from the factory to a city, the metal wheels of the train cars running on metal rails create small particles of metal that fly into the air and land on the horizontal surfaces of the car.
They are hot and will adhere to the paint. Then when they get wet from rain; snow or just dew they rust and create tiny little rust spots which are quite visible on white, yellow, beige or light colored cars.
The proper way to remove them is to soak towels in “rail dust remover” and lay the towels on the offended areas of the vehicle. Follow the manufacturer’s recommended dwell time to allow the chemical to dissolve the rust spots and loosen the particles of metal.
When this is accomplished rinse off the car with high pressure water to insure all particles are gone.
Read also: How to maintain microfiber towels
Then prespray the car with a mild alkaline cleaner to neutralize the acidic rail dust remover. If you do not do this, acid will remain on the paint finish and when it gets wet it will be active and could etch into the finish.
Then rinse off the alkaline chemical and follow that with a thorough hand car wash using a mild carwash shampoo and water.