Checking the Timing in the Car Wash
This month we are going to talk about the timing of the car wash process and how, if managed properly, it can save you thousands of dollars a year on chemical and water cost.

Maintaining a High Pressure Wheel Cleaner
This month we are going to talk about maintaing a high pressure wheel cleaner.

What’s in a Grease?
One of the things we often talk about is greasing equipment. But what’s in a grease?

Checking for Leaks in the Equipment Room
This month we are going to talk about a topic that does not pertain to just one piece of equipment, but rather an entire room – the chemical room.

Checking the Chain and Rollers for Wear
This month we are going to talk about a topic that has been written about in the past, but is such a critical thing to the operation of the car wash that it needs to be brought up again – the chain and rollers on the conveyor.

Checking the Fluid Temperature on Power Packs
At CarWash College™ we teach preventive maintenance.

Inspecting the UHMW Axle Bearing for Wear
This month we are going to talk about a piece of equipment that is often so reliable that it often goes unchecked.

Checking for Wear on the Tire Brush
This month we are going to talk about a piece of equipment that has evolved in recent years.

Checking for Leaks at the Drive Section on the Conveyor
This month we are going to talk about a piece of equipment that often goes unchecked until it is too late.

Inspecting Prep Gun Wand Nozzles for Excessive Wear
This month we are going to talk about a piece of equipment that has more than one function, the prep gun.

Greasing the Bearings on a Top Motor Side Washer
This month we are going to talk about a piece of equipment that often goes unchecked – the top motor side washer.

Keeping blowers clean
This month we are going to talk about blowers and the importance of frequently cleaning them.
