Why carwashes must follow lockout and tagout procedures - Professional Carwashing & Detailing

Why carwashes must follow lockout and tagout procedures

Having these procedures in place not only complies with OSHA standards but, more importantly, can also prevent serious injury.

When it comes to working on carwash equipment at the wash, effective lockout/tagout (LOTO) procedures are crucial. Having these procedures in place not only complies with Occupational Safety and Health Administration (OSHA) standards but, more importantly, can also prevent serious injury or death.

For those who aren’t familiar with what a LOTO program is, review OSHA Subpart J, 29 CFR 1910.147 “The Control of Hazardous Energy.” This procedure establishes minimum standards for LOTO at a facility.

The goal of the program is the prevention of accidents caused by the unintentional energization of equipment or release of stored energy. An employee isolates an energy controlled device by applying a lock or tag to the device in the off, or safe, position, indicating that the control cannot be operated. Note that energy sources do not have to be electrical only. For instance, an air compressor would qualify as well.

Having a LOTO plan in place does not automatically mean that a carwash has all the components for compliance. Some owners who have experienced harmful consequences of not providing a proficient LOTO program may have felt that they had protected their employees by implementing a LOTO plan. However, after investigating the circumstances behind a few of these incidents, it was learned that sometimes a carwash can comply with the letter of the law, but not the spirit of the law.

For example, in 2005 a carwash attendant died after being pulled into a side-arm brush while washing down the wash’s tunnel. In this incident, the carwash was missing a written procedure for safely performing the task that lead to the attendant’s death. The development of an audit and inspection program as part of the LOTO plan would have pointed out, in writing, the potential dangers of the procedure being performed by this individual. It would have educated the employee on the dangers associated with the job he was doing and why shutting down the power was necessary.

I recently read a Grainger article outlining a five-step plan that I believe will help bolster a LOTO program. It’s not just about having the locks, tags, signage and good intentions. The five steps are:

  1. Develop and document your energy control policy/program.
  2. Create and post written, equipment-specific lockout procedures.
  3. Identify and mark all energy control points.
  4. Train your employees, communicate and conduct periodic inspections.
  5. Equip your employees with the proper lockout tools and warning devices.

It is important to note that the carwash attendant who died from being pulled into a side-arm brush was performing a routine job. He was simply washing down the area around the conveyor where an excess amount of dirt and debris had accumulated. It was the process that put this employee in harm’s way, and not the actual hazard of this particular job.

In this industry, we know that we must comply with regulations. After all, we are responsible for doing the best we can to keep employees safe. But, we also need to continue to question ourselves and keep open minds to constantly evaluate if there is anything more we can do. It is following the spirit of the laws that will truly keep carwash employees safe.

Take another look at your LOTO program, and decide if it will meet all the criteria necessary to protect employees while working at the wash. If you don’t already have one in place, work with your insurance provider to get one.

Remember: A safe wash protects people and profits.


 

Opinions and information presented in this blog may or may not be supported by the publisher of Carwash.com. This blog post originally appeared at www.cwinsurance.blogspot.com.

You May Also Like

Get your car summer ready during National Spring Car Care Month 

Make summer driving safe and enjoyable with these eight basic maintenance tips for your roadtripping vehicle.

The season that features one of America’s favorite pastimes, the family road trip, is just around the corner, and Lucas Oil has eight important tips for National Spring Car Care Month to make sure vehicles are ready to hit the road and deliver miles of memories and great times.

How to manage overtime at your carwash

Discover essential tips to ensure transparency, fair pay and employee satisfaction while managing overtime effectively.

scales, money, wages
7 points to consider when installing bollards at your carwash

Bollards provide safe spaces for vacuuming, detailing, and finishing work in areas where people and cars are moving.

How durable are ceramic coatings?

Understanding the longevity of ceramics in automotive protection.

yellow car exterior in auto dealership
Can You Count on Your Insurance to Cover Car Wash Damage?

When it comes to car wash damage, insurance coverage can vary. It’s important to understand your policy and consult with your insurance provider.

signing car insurance

Other Posts

Ziebart recognizes franchise owners for year of excellence

TROY, Mich. — Dealer of the Year and New Dealer of the Year honors were awarded at the conference.

ziebart celebration
Express Wash Concepts hosts inaugural Washy Awards

COLUMBUS, Ohio — The Washy Awards recognized exceptional sites and team member contributions, as well as long term service anniversaries.

International Carwash Association welcomes Ben Higgs

WHEATON, Ill. — Higgs brings extensive experience from the auto dealer market to enhance the renowned LEAD carwash manager training program.

ica welcomes ben higgs
4 pillars of carwash operational excellence

Understanding the intricacies of running the business.

4 pillars of carwash operational excellence